A two-layer model for studying 2D dissolved pollutant runoff over impermeable surfaces

Dissolved pollutants in stormwater are a main contributor to water pollution in urban environments. However, many existing transport models are semi-empirical and only consider one-dimensional flows, which limit their predictive capacity. Combining the shallow water and the advection–diffusion equations, a two-dimensional physically based model is developed for dissolved pollutant transport by adopting the concept of a ‘control layer’. A series of laboratory experiments has been conducted to validate the proposed model, taking into account the effects of buildings and intermittent rainfalls. The predictions are found to be in good agreement with experimental observations, which supports the assumption that the depth of the control layer is constant. Based on the validated model, a parametric study is conducted, focusing on the characteristics of the pollutant distribution and transport rate over the depth. The hyetograph, including the intensity, duration and intermittency, of rainfall event has a significant influence on the pollutant transport rates. The depth of the control layer, rainfall intensity, surface roughness and area length are dominant factors that affect the dissolved pollutant transport. Finally, several perspectives of the new pollutant transport model are discussed. This study contributes to an in-depth understanding of the dissolved pollutant transport processes on impermeable surfaces and urban stormwater management.     

一种横观各向同性岩体蠕变模型

层状岩体由于层理面或者结构面的存在，在力学上具有横观各向同性的特点，现有的各向同性蠕变模型难以全面反映横观各向同性岩体的蠕变力学特性。为构建能够反映横观各向同性岩体的三维蠕变模型，以能反映瞬时应变、减速蠕变和稳态蠕变特征的黏弹性Burgers模型为基础，基于常泊松比假定，在三维各向同性蠕变本构方程的基础上，按照算子替换的方法，将横观各向同性柔度矩阵代替各向同性柔度矩阵，并考虑了平行和垂直层理方向岩体蠕变力学行为的差异性，推导了横观各向同性岩体的三维蠕变本构方程。根据本构方程的特点，提出了根据平行和垂直方向岩体蠕变试验结果进行三维蠕变本构模型中蠕变参数的辨识方法。将提出的模型应用于三轴蠕变试验参数辨识，从而获得了一套完整的三维蠕变参数，并与试验结果进行对比分析，从而验证了所提模型与方法的合理性和有效性。进一步，指出了传统蠕变试验设计方案的局限性，给出了横观各向同性材料蠕变试验设计建议。研究成果为研究岩体三维蠕变机制提供了新思路，可对岩体蠕变试验设计提供相应的科研支撑。     

南海北部西沙海槽沉积物管状黄铁矿特征及其形成机理*

南海北部西沙海槽S1站位的岩心柱沉积物中广泛发育自生矿物黄铁矿,其形态以管状为主,且具有内部中空的圈层结构。使用扫描电镜、电子探针、LA-ICP-MS、SIMS等测试方法研究了管状黄铁矿的形态及圈层结构,结果显示: (1)管状黄铁矿发育内部中空的圈层结构,其中内圈层(I_py)由莓球状黄铁矿呈五角十二面体紧密堆积组成,外圈层(O_py)由晶形较好晶粒较大的八面体黄铁矿组成,并混有沉积碎屑及钙质生物壳体;(2)内圈层和外圈层分别呈现出贫S富Fe和富S贫Fe的特征,其成因是甲烷渗漏造成的局部还原环境使得As进入黄铁矿中导致晶格空缺或被扭曲,从而促进Ni、Co、Cu、Zn、Pb等微量元素的掺入;(3)内圈层、外圈层发生了明显的硫同位素分馏现象,内圈层中 δ³⁴S 平均为-37.8‰,外圈层中 δ³⁴S 平均为-29.3‰。研究认为,管状黄铁矿作为曾经甲烷渗漏的通道,其生长机制可分为3个阶段: (1)气水通道形成阶段: 向上运移的甲烷流体在沉积物孔隙中逐渐形成气水通道;(2)外圈层形成阶段: 当向上运移的甲烷与硫酸盐发生甲烷厌氧氧化时,逐渐形成晶体较大、晶形较好的八面体黄铁矿外圈层;(3)内圈层形成阶段: 随着甲烷浓度逐渐降低,在气水通道中的微生物作用下,剩余甲烷与向下运移的硫酸盐继续反应形成莓球状黄铁矿内圈层。因此,南海北部的泥岩中大量发育的管状黄铁矿常常与地层中甲烷水合物的存在有关。     

GNSS多天线基线网单历元模糊度同步解算法

提出多天线基线网单历元模糊度同步解算法，其具体实现步骤为：1）根据宽巷组合模糊度易于固定的优点，采用附加已知基线长度约束法同步解算各基线的宽巷模糊度，得到dm~cm级精度的近似基线分量；2）将解算得到的各近似基线分量作为约束，同步解算各基线的基频模糊度，以获取mm级精度的基线矢量。该方法的关键在于检验各历元宽巷模糊度解算的正确性，以获取可靠的近似基线分量，为解算各基线的基频模糊度提供准确的基线先验信息。由于动态情况下各历元观测信息比较少，单纯依赖ratio检验不可靠，提出结合基线误差、单位权中误差、基线网模糊度闭合环及ratio值等对多组宽巷模糊度进行检验，避免ratio值设置不当导致模糊度检验中发生纳伪和弃真问题。实测数据结果证明，该处理方法使得模糊度解算的成功率提高1%~2%，可以获取移动平台更丰富的导航信息，提高其服务能力。     

遥感技术在“6·17”丹巴堵江泥石流灾害链灾区应急救援抢险决策中的应用

2020年6月17日,四川丹巴县半扇门镇梅龙沟发生泥石流,阻断小金川河,形成堰塞湖,造成重大财产损失与人员伤亡。为掌握第一手灾情,辅助开展应急救援,以国产高分二号卫星数据为主要数据源,结合无人机航空摄影数据和灾后现场调查等资料,开展了“6·17”丹巴堵江泥石流灾害链灾区应急调查与分析。研究认为: 灾区影响人口约6.5万人; 国网丹巴县供电公司应急救援队与小金县联通通信应急抢险救援队距离最近,半扇门中学等5所学校可作为临时安置避难场所备选; 受影响矿山企业6家、重要水库1座、水电站1座; 泥石流沟总体呈NW—SE向展布,掩没面积约14.27万m²; 堰塞湖湖面面积约1.03 km²,淹没区约49.8万m²,路基路面全毁路段约2.1 km,下游疑似灾害隐患点9处,因灾受损民居25处、桥梁5处; 优选了2条灾后通达性较好的通往泥石流重灾区的救援生命线。借助遥感技术深入分析泥石流灾害链影响人口等灾情先期研判、灾情灾损应急调查及应急救援生命通道优选,对我国西南山区类似条件地质灾害隐患点的应急抢险救援、防灾减灾工作具有重要的指导意义。     

Purification and Characterization of a Novel Hydrolase That Can Specifically Degrade the Polysaccharide Isolated from Green Seaweed Ulva prolifera

The extracellular polysaccharide hydrolase-producing strain EP-1 was isolated from seawater and identified as Paenibacillus pabuli. Furthermore, a homogeneous extracellular polysaccharide hydrolase from Paenibacillus pabuli EP-1 was purified by combining ion-exchange chromatography and size exclusion chromatography with a purification fold of 90.69 and recovery of 16.23%. Characterization of the purified polysaccharide hydrolase revealed a molecular mass of 38 k Da and optimum activity at 45℃ and pH 6.0. The polysaccharide hydrolase maintained its stability within a wide range of pH(3.0–12.0) and thermal stability when the temperature was below 50℃. The presence of Hg~(2+), Fe~(2+), Mn~(2+), Co~(2+) and SDS notably decreased hydrolase activity, and organic solvents such as formaldehyde, acetone, DMF and acetonitrile completely inhibited hydrolase activity. The purified hydrolase had no activity on agar, carrageenan, gellan gum, sodium alginate, or starch, but effectively hydrolyzed the polysaccharide from Ulva prolifera. The Km and Vmax values of this hydrolase were 43.84 mg m L~(-1) and 4.33 mg m L~(-1) min~(-1), respectively. The sequence analysis with quantitative time-of-flight mass spectrometry indicated that the hydrolase was an endoglucanase.     

Rockfall seismic features analysis based on in situ tests:frequency,amplitude, and duration

In the seismic event classification,determining the seismic features of rockfall is significantly important for the automatic classification of seismic events because of the huge amount of raw data recorded by seismic stations in continuous monitoring. At the same time, the rockfall seismic features are still not completely understood.This study concentrates on the rockfall frequency content, amplitude(ground velocity), seismic waveform and duration analysis, of an artificial rockfall test at Torgiovannetto(a former quarry in Central Italy). A total of 90 blocks were released in the test, and their seismic signals and moving trajectories were recorded by four tri-axial seismic stations and four cameras, respectively. In the analysis processing,all the artificial rockfall signal traces were cut separately and the seismic features were extracted individually and automatically. In this study, the relationships between a) frequency content and impacted materials, b) frequency content and the distance between block releasing position and seismic station(source-receiver distance) were discussed. As a result, we found that the frequency content of rockfall focuses on 10-60 Hz and 80-90 Hz within a source-receiver distance of 200 m, and it is well correlated with impacted material and source-receiver distance. To evaluate the difference between earthquake and rockfall, 23 clear earthquake signals recorded in a seven month-long continuous seismic monitoring, carried out with the four seismic stations, were picked out, according to the Italian national earthquakes database(INGV). On these traces we performed the same analysis as in the artificial rockfall traces, and two parameters were defined to separate rockfall events from earthquake noise. The first one, the amplitude ratio, is related to the amplitude variation of rockfall between two stations and is greater than that of earthquakes, because of the higher attenuation occurring for rockfall events, which consists in high frequencies whereas for earthquakes it consists in low frequencies. The other parameter, the shape of waveform of signal trace, showed a significant difference between rockfall and earthquake and that could be a complementary feature to discriminate between both. This analysis of artificial rockfall is a first step helpful to understand the seismic characteristics of rockfall, and useful for rockfall seismic events classification in seismic monitoring of slope.     

西藏甲玛铜多金属矿床磁黄铁矿标型矿物学特征及其地质意义

甲玛矿床位于冈底斯成矿带东段,是西藏地区最大的铜多金属矿床之一。磁黄铁矿是甲玛矿床最常见的金属矿物之一,其标型特征不仅反映其自身形成环境,对其形成机制和矿床成因也具有指示意义。文章选取产于不同岩性中的磁黄铁矿矿石样品,利用矿相学、X射线衍射和电子探针分析等手段对磁黄铁矿的形态、成分和结构进行了分析研究。研究表明,甲玛矿床的磁黄铁矿主要分布在距离岩体中心较远的矿区远端矽卡岩和角岩中。磁黄铁矿的晶胞参数和粉晶X射线衍射曲线显示矽卡岩中的磁黄铁矿主要为高温六方磁黄铁矿,角岩中的磁黄铁矿为高温六方磁黄铁矿和低温单斜磁黄铁矿的交生体,但主要以低温单斜磁黄铁矿为主。通过对矽卡岩和角岩中的磁黄铁矿进行电子探针测试,结果显示:矽卡岩中的磁黄铁矿中w(Fe)为60.09%～60.71%,平均为60.38%,w(S)为38.18%～38.69%,平均38.35%,化学分子式为Fe_8S_9～Fe_(10)S_(11);角岩中的磁黄铁矿中w(Fe)为59.05%～59.57%,平均为59.10%,w(S)为39.28%～39.95%,平均39.59%,化学分子式为Fe_5S_6～Fe_7S_8。根据以上矿物学特征,笔者进一步探讨了该矿床磁黄铁矿的沉淀机制:炽热的岩浆热液上涌,与碳酸盐岩地层和碎屑岩地层接触发生相互作用,并有大气水的加入,使得成矿流体在角岩中先快速降温,形成高温六方磁黄铁矿和低温单斜磁黄铁矿的交生体。同时,大量的含矿热液形成,并充填于有利的成矿空间(主要为层间破碎带)沉淀成矿,形成矽卡岩矿体,然后流体在矽卡岩矿段中经历缓慢降温,形成高温六方磁黄铁矿。结合矿床地质特征和相关元素地球化学特征,认为甲玛矿床类型为斑岩-矽卡岩型。     

徐闻南山镇红树林沉积物及红树植物中重金属的累积特征与迁移规律

为探究重金属在红树林沉积物及红树植物中的分布累积及迁移规律，选取了徐闻南山镇红树林为研究对象，通过测定红树林沉积物及红树植物不同部位（根、茎、叶）的重金属质量分数，运用富集因子、生物富集系数、转移系数及相关性分析等方法进行分析。结果表明：1）红树林沉积物重金属质量分数表现为铬（Cr）＞锌（Zn）＞镍（Ni）＞铜（Cu）＞铅（Pb）＞砷（As）＞汞（Hg）＞镉（Cd），为中等变异程度；除了镍（Ni）元素外，其余7种重金属未超过国家一级标准，除了铅（Pb）元素外，其余7种重金属均超过广东省土壤环境背景值，说明研究区沉积物中重金属具有一定的积累效应。2）沉积物中砷（As）、铜（Cu）、锌（Zn）、汞（Hg）、镍（Ni）、铬（Cr）富集因子值均＞1.5，说明受到轻微人为活动影响；各站位镍（Ni）富集因子值均＞5，结合研究区背景，反映了镍（Ni）受到自然和人为输入的共同影响。3）白骨壤体内重金属主要集中在根部，而红海榄体内重金属在根茎叶中分布相对均匀。白骨壤根茎叶部位的大多数重金属质量分数远高于红海榄，说明白骨壤对重金属的吸附能力比红海榄强。汞（Hg）集中分布在植物的叶片部位，且与其他重金属之间相关性不明显；推测汞（Hg）主要通过叶片吸收进入植物体内，与交通运输污染有关。4）不同红树植物对不同重金属富集能力各异，白骨壤对重金属的富集能力表现为：镉（Cd）＞砷（As）＞铜（Cu）＞锌（Zn）＞汞（Hg）＞铅（Pb）＞镍（Ni）＞铬（Cr），红海榄表现为：镉（Cd）＞铜（Cu）＞汞（Hg）＞锌（Zn）＞铅（Pb）＞砷（As）＞镍（Ni）＞铬（Cr）。白骨壤和红海榄对汞（Hg）的运移能力都较强；红海榄对镉（Cd）的富集能力和转运能力都较强，而白骨壤对镉（Cd）富集能力较强，转运能力却较弱，这说明红树植物对重金属元素的富集能力与转运能力不存在正比关系。     

黄土高原沟谷地貌发育演化研究进展与展望

黄土沟谷是黄土地貌中最有活力、最具变化、最富特色的对象单元,黄土高原千沟万壑的地貌形态以及触目惊心的侵蚀状态也让区域内沟谷地貌的形成、发育及演化问题成为研究中焦点及前沿性科学问题。近年来,诸多学者采用地学测年法、特征表达法、监测模拟法力图实现对黄土沟谷发育演化进程中“过去-现代-未来”的科学认知。这些研究在相当程度上丰富了黄土沟谷发育过程的认知。本文梳理了黄土高原沟谷地貌演化相关研究的现状,并从黄土高原地貌演化、黄土沟谷发育、基于DEM的沟谷信息提取与表达等研究进行了系统的回顾、梳理与分析。此外,本文提出“黄土沟道剖面群组”概念与方法,试图从新的视角审视黄土沟谷地貌发育演化过程。沟道剖面在黄土沟谷发育演化进程中传递物质能量和累积地形动力,并通过径流节点的串联实现剖面群的连接与组合,形成独特的剖面“群组”模式;该沟道剖面群组是集黄土沟谷地貌特征与过程于一体的综合信息集成体,其三维空间结构是对黄土沟谷地貌发育演化的高度抽象与映射,并可望进一步丰富黄土高原数字地形分析理论与方法体系,为黄土高原黄土地貌成因机理与空间分异格局带来创新的认识。